During the healing period, 1 implant failed in osseointegration. At the last follow-up observation, Etomoxir cost none of cases showed marginal bone loss of >1 mm and a 96.9% success rate was seen. The follow-up observation period after placement of the superstructure was 12-30 months (average 15). Between the simultaneous placement group and the delayed placement group, marginal bone loss showed no statistically significant difference (P = .455). In the entire patient group, the volume of sinus bone graft loss did not correlate with marginal bone loss (P = .568). Preoperative alveolar bone height
was 0.8-8.8 mm (mean 4.64), postoperative alveolar bone height was 12-21.8 mm (mean 17.67), and the alveolar bone height 1 year after the operation was 11.2-20.8 mm (mean 16.78). Between the group with perforation of the maxillary sinus membrane and the group without, no difference in marginal bone loss was observed (P = .628). Additionally,
no difference in the volume of sinus bone graft resorption between the two groups was observed (P = .970).
Conclusion. It was concluded that Osteon is suitable for use in sinus graft application. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 109: e14-e20)”
“Flame retardant polycarbonate (FRPC) with 0.2 wt % additives of potassium perfluorbutane sulfonate and polydimethylsiloxane was found to achieve V-0 rate at 1.6 mm thickness without E7080 significantly affecting the mechanical properties of PC. Condensed aromatic bonds find more with a small amount of Si-O bonds were found in the UL-94 burning residues tested by FTIR spectra. A compact char layer with cavities inside was formed on the surface of the sample during the rapid decomposition of FRPC, and the concentration of Si was found to be much higher inside the surface of the char layer than that outside the surface analyzed by SEM-EDX, which was related to the synergistic effects of the two flame retardants of PPFBS and
PDMS. A schematic diagram was designed to describe the mechanism of the FRPC. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 119: 2730-2736, 2011″
“We characterize the resistivity of InP buffer layers deposited by metal-organic vapor-phase epitaxy for the fabrication of Al-free GaInP/GaInAs high electron mobility transistors (HEMTs). Achieving highly-resistive InP buffer layers on semi-insulating (SI) InP: Fe substrates has long been recognized to be challenging. This is particularly true in HEMT applications because such devices are especially sensitive to the deleterious effects of buffer leakage currents. Our experiments show that impurities arising from the SI InP substrate as well as from reactor parts produce an overall n-type doping concentration of n=1-10 X 10(16) cm(-3) near the buffer/substrate interface, which decays exponentially to a level of 4 X 10(14) cm(-3) after approximately 1 mu m of InP growth.